Which Type of Hydraulic Fluid Should be Used?
Release time: 2024-06-14
Which Type of Hydraulic Fluid Should be Used?
Most hydraulic systems can function adequately with a range of fluids, such as multigrade engine oil, automatic transmission fluid, and traditional anti-wear hydraulic oil. However, the determination of the most suitable fluid for a specific application is dependent on various factors. While it is impractical to provide a singular recommendation that applies universally to all types of hydraulic equipment in all operating conditions, certain considerations must be taken into account when choosing or altering a hydraulic fluid.
When choosing a hydraulic fluid, one must prioritize viscosity as the paramount factor. Regardless of the oil's other properties, optimal component lifespan cannot be attained if the viscosity grade is not appropriately aligned with the operational temperature range of the hydraulic system. Determining the suitable fluid viscosity grade for a specific hydraulic system entails assessing various interconnected variables:
1. Initial viscosity at the lowest ambient temperature
2. Anticipated maximum operating temperature, influenced by the highest ambient temperature
3. Acceptable and ideal viscosity range for the components within the system.
If the hydraulic system is required to operate in freezing temperatures during winter and tropical conditions in summer, it is likely that multigrade oil will be necessary in order to maintain viscosity within permissible limits across a wide operating temperature range. Maintaining fluid viscosity within the optimum range of 25 to 36 centistokes maximizes the overall efficiency of the hydraulic system, as less input power is dissipated as heat. Under certain conditions, the use of multigrade oil can reduce power consumption and lead to decreased fuel consumption for users of mobile hydraulic equipment.
However, there are some considerations to keep in mind when using multigrade fluids in hydraulic systems. The viscosity index (VI) improvers used in multigrade oils may have a negative impact on the air separation properties of the oil, which is particularly problematic in mobile hydraulic systems that typically have small reservoirs and reduced de-aeration capabilities.
Furthermore, if a multigrade oil not specifically designed for use in hydraulic systems, such as engine oil, is utilized, the high shear rates and turbulent flow conditions often encountered in
can break down the molecular bonds of the VI improvers over time, leading to viscosity loss.
Due to this rationale, it is advised that in the event a multigrade engine oil is utilized in a hydraulic system, the minimum permissible viscosity values as specified by the hydraulic component manufacturers should be augmented by 30% to counterbalance VI improver sheardown.
In any case, if the hydraulic system operates within a limited temperature range and it is feasible to uphold optimal fluid viscosity with a monograde oil, it would be prudent to opt for simplicity and refrain from employing a more intricate multigrade oil.
The consideration of the use of detergent or non-detergent hydraulic fluids, specifically DIN 51524; HLP-D fluids, is paramount due to their classification as anti-wear hydraulic fluids containing detersive and dispersive additives. These fluids have garnered approval from major hydraulic component manufacturers.
Detergent oils possess the unique capability of emulsifying water and dispersing and suspending various contaminants such as varnish and sludge. While this characteristic ensures that components remain free from deposits, it necessitates the need for filtration to remove contaminants as they are not precipitated out. This feature may be advantageous in mobile hydraulic systems where there is limited space for the settling and precipitation of contaminants in the reservoir.
It is important to acknowledge that while detergent fluids excel in water emulsification, they do not separate water from the fluid. The presence of water accelerates aging of the oil, diminishes lubricity and filterability, shortens seal life, and contributes to corrosion and cavitation. Furthermore, emulsified water may be converted into steam in highly loaded sections of the system. To prevent these issues, it is paramount to maintain water content below the saturation point of the oil at the operating temperature.
Anti-Wear Additives: The Role and Impact
Anti-wear additives serve the important function of sustaining lubrication in boundary conditions. Zinc dialkyl dithiophosphate (ZnDTP) is the most commonly used anti-wear additive in engine and hydraulic oils. However, there is a gradual shift away from its use due to environmental concerns, as zinc is categorized as a "heavy" metal. The presence of ZnDTP in oil is not universally regarded as beneficial, as it has the potential to chemically deteriorate and corrode certain metals, as well as impede filterability. Nonetheless, advancements in stabilized ZnDTP chemistry have largely mitigated these issues, establishing it as a crucial additive for fluids utilized in high-pressure, high-performance hydraulic systems equipped with piston pumps and motors. Some Original Equipment Manufacturers (OEMs) recommend a ZnDTP concentration of at least 900 ppm for optimal performance in mobile applications.
In conclusion, when considering hydraulic oil recommendations, it is advisable to adhere to the guidelines provided by the equipment manufacturer for warranty purposes. While deviating from the original specifications may potentially enhance hydraulic system performance and reliability in certain applications, it is essential to consult with a technical specialist from both your oil supplier and the equipment manufacturer before making any changes.
11
+86-18733900528
13930962126@cc.cc








