High-pressure rotary seals and medium-pressure rotary seals.
Release time: 2024-05-21
High-pressure rotary seals and medium-pressure rotary seals.
Our inventory of high-pressure and medium-pressure rotary seals comprises a range of standard, proprietary, and patented rotary shaft lip seals distinguished by their unique design and material components that aim to optimize sealing efficiency.
These design attributes have been proven to minimize:
- Parasitic friction
- Heat accumulation
- Wear on seals and shafts
- Torque production
- Power consumption
We encourage you to consult with one of our seasoned seal engineers to determine the most suitable seal for your specific application.
Medium-Pressure Rotary Seals are designed to operate at pressures up to 150psi, with a PV-Rating ranging from 0.9 to 2.0.
Typical applications for these seals include sealing pressure from one side in equipment such as pumps, motors, compressors, machine tools, brakes, clutches, and mixers.
The operating range for these seals includes pressures up to 60psi continuously, depending on shaft speed, and up to 150psi for maximum pressure spikes. For pressures exceeding 40psi, it is recommended to contact engineering for further guidance.
In terms of surface speed, these seals can withstand speeds up to 2,700fpm, depending on the pressure. Temperature-wise, they can operate within a range of -58 to 400°F, depending on the material used.
The PV-Rating for these seals ranges between 0.9 to 2.0, depending on the specific design and material. It is important to note that seals should not be operated at their maximum pressure and speed ratings simultaneously.
Materials used in these seals include low-friction NBR/Nitrile, FKM/Viton, HNBR, EPDM, SIL, CR, ACM, VMQ, as well as low and high-temperature grades, and FDA-compliant options.
Medium-pressure rotary seals are capable of handling pressures up to 200psi, with a PV-Rating ranging from 1.4 to 5.0.
Typical applications for these seals include sealing pressure from one side in equipment such as pumps, motors, compressors, machine tools, brakes, clutches, mixers, dispensing heads, and others.
The operating range for these seals is up to 110psi (7.6bar) continuously, depending on shaft speed, with maximum pressure spikes reaching up to 200psi (14bar). For pressures exceeding 60psi (4bar), it is advised to contact engineering. Surface speed can reach up to 6,000fpm (30m/s), depending on pressure, while the temperature range is -58 to 400°F (-50 to 200°C), depending on the seal material. The PV-Rating ranges from 1.4 to 5.0, depending on the seal design and material used.
Please note that seals cannot be operated at both their upper pressure and speed ratings simultaneously. Various materials are available for these seals, such as NBR (Nitrile), FKM, Viton®, HNBR, EPDM, SIL, CR, ACM, VMQ, PTFE, low-temperature material grades, and FDA-compliant grades.
Medium-Pressure Rotary Seals are designed to withstand pressures of up to 500psi with a PV-Rating ranging from 5.0 to 9.0. These seals are commonly used in various applications such as pumps, motors, compressors, machine tools, brakes, clutches, mixers, and more.
The operating range of these seals includes pressures of up to 150psi continuously, with a maximum pressure spike of 500psi. Surface speeds of up to 7,000fpm and temperatures ranging from -58 to 400°F are also within the recommended range, depending on the seal material.
It is important to note that seals should not be operated at their maximum pressure and speed ratings simultaneously. Materials used for these seals include NBR, FKM, Viton®, HNBR, EPDM, PTFE, low-temperature material grades, FDA-compliant grades, and proprietary materials. For pressures exceeding 80psi, it is advised to consult with the engineering department.
High-Pressure Rotary Seals are capable of withstanding pressures of up to 3,500psi maximum, with a PV rating ranging from 7.0 to 9.0. These seals are commonly utilized in pumps, motors, rotary couplings, brakes, winches and draw-works, mixers, drilling equipment, downhole tools, swivels, and other similar applications.
The operating range of these seals includes pressures up to 3,500psi (240bar), with special designs available for pressures up to 10,000psi (700bar) at low surface speeds. For pressures exceeding 3,000psi (210bar), it is recommended to consult with engineering for specialized solutions. The surface speed capability of these seals is up to 1,200fpm (6m/s), depending on the pressure at hand. Temperature tolerance ranges from -40 to 400°F (-40 to 200°C), contingent on the material used.
The PV-Rating varies between 7.0 to 9.0 based on the specific seal design and material composition. It is important to note that these seals should not be operated at their maximum pressure and speed ratings simultaneously. The materials used in the manufacturing of these seals include PTFE composite and proprietary materials.
High-pressure rotary seals are capable of withstanding pressures of up to 10,000psi, with a PV-rating ranging from 6.0 to 10.0. These seals are commonly used in applications such as swivels, rotary manifolds, slew rings, positioning equipment, and downhole tools.
The operating range for these seals includes pressures of up to 10,000psi, with special designs available for pressures up to 20,000psi at low surface speeds. For pressures exceeding 3,000psi, it is recommended to contact the engineering team for further assistance.
These seals can operate at surface speeds of up to 400fpm, depending on the pressure, and at temperatures ranging from -58 to 400°F, depending on the material used. The PV-rating of 6.0 to 10.0 depends on the seal design and material selected.
It is important to note that these seals cannot be operated at their maximum pressure and speed ratings simultaneously. The materials used for these seals include PTFE composite and proprietary materials.
11
+86-18733900528
13930962126@cc.cc







