How to Measure and Identify Oil Seals
Release time: 2024-05-01
How to Measure and Identify Oil Seals
It might be difficult to replace a vital component correctly, especially if you don't have the original machine specs. Fortunately, there are several ways to detect oil seals, including their design, size, and substance. Because there are hundreds of various oil seals on the market, this tutorial will focus on the four most popular design types. Typically available with a single or double lip and in Nitrile or Viton rubber.
Oil Seal Single Lip vs Double Lip
To begin, the oil seals discussed in this guide categorize the single lip as the inner diameter at the bottom of the component. The seal's operation is dependent on the single lip, which contains the oil, grease, or lubricant. The only difference between a single and double lip is the extra rubber lip on the top of the oil seal, which helps keep dust and grime away from the shaft. Visual examination alone might lead to incorrect identification of the oil seal lip. For this reason, you should press along the inner diameter at the top of the seal; if you feel a ridge with minor movement or give, you most likely have a double-lipped oil seal.
Identify Oil Seal Design
1. Type A: Rubber Covered Lip Seals
The exterior diameter is completely covered, ensuring good sealing. The most common sort of oil seal is one that is totally covered in rubber. Excellent resistance to heat cycles, temperatures, and many chemical agents.
2. Type B: Metal Outer Diameter Oil Seals.
Economical metal outer diameter for ordinary applications. This is a low-cost oil seal with metal exposed on one side, providing a tighter fit between the oil seal and the housing or bore. As a result, it has limited use for sealing thin liquids or gasses.
3. Type C: Reinforced Metal Insert Oil Seals
The same design as type B, but with an extra inner casing to increase structural stiffness. This type of oil seal is commonly employed in heavy-duty engineering machinery or big diameter seals.
4. Type F: Stainless Steel Garter Spring.
The same design as type A, with a corrosion-resistant metal casing and a stainless steel garter spring. Suitable for use with a variety of fuels and chemicals.
Identify Oil Seal Material
Nitrile (NBR) is black in color, but Viton (FKM) is often brownish.
How To Measure Oil Seals
Finally, component codes have the same dimensions as our O-rings: inner diameter, outer diameter, and height. This differs from the industry-standard norm, which states that imperial oil seals have the following dimensions: outer diameter, inner diameter, and height.
We hope the information in this post helps you choose the best oil seal for your needs. If you have any questions, please call one of our sales engineers at 8618733900528. SNAK has over 6,000 oil seals available for purchase online; browse our collection today.
11
+86-18733900528
13930962126@cc.cc







